Materials List - Oval Poker Table
Posted on April 20, 2008
Filed Under Poker Table Plans
Local Hardware Store:
- 1 8’x4’ sheet of ¼” Pine – cheaper plywood can be substituted, but I would stay away from MDF.
- 1 8’x4’ sheet of ½” Birch – this will be the visible wood on the table, so make sure it’s nice. I like birch because it stains nicely and has a soft look.
- 1 8’x4’ sheet of ¾” Pine – again, cheaper plywood can be substituted, but I would stay away from MDF (a type of plywood).
- Sandpaper – fine and rough grade. I used an electric sander and was so glad that I did.
- 3M Super 77 Multipurpose Adhesive
- Miniwax wood finish – I used cherry stain
- Miniwax fast drying polyurethane
- 8 clamps that can hold together 2 pieces of plywood (roughly ¾” thick) – these aren’t necessary but make things a heck of a lot easier.
- Elmer’s wood glue.
- Banquet Table Legs – these are sold by the pair and are in a flat white box. They have them at Home Depot for sure.
- 2 paintbrushes for the stain and the poly. I spent a little extra on the poly brush.
- 1 yardstick – found in the paint dept. of Home Depot
- 12 Finishing nails - ½”
- 12, ¾” wood screws
- 12, 1 ¾” wood screws
- 12, 1 ¼” wood screws
Tools
- Power Drill, although a couple of screwdrivers would work too
- Electric Sander, although sandpaper will work.
- Jigsaw – a router can also be used, but I find the jigsaw works perfectly and is more common around the everyday home.
- Tape measurer
- Razorblade
- Staple Gun
Next: Making the Cuts
Comments
One Response to “Materials List - Oval Poker Table”
Leave a Reply
Hello! Please e-mail me your contacts. I have a question zachary@complective.ru” rel=”nofollow”>……
Thanks!…