http://www.ezpokertables.com The Best FREE Poker Table Plans on the Web Tue, 21 Oct 2008 03:52:10 +0000 http://backend.userland.com/rss092 en This post is password protected. To view it please enter your password below: Password: http://www.ezpokertables.com/oval-poker-table-plans-download/ The first step is that you will need to glue the 1 ½” rail lip from Sheet #2 to the 4” rail from Sheet #1. The two pieces should match up correctly, but there may be a few small discrepancies because they came from two different pieces of wood. ... http://www.ezpokertables.com/building-the-rail-oval-poker-table/ First you will attach the playing surface to the base. Use a tape measurer to make sure that the surface is directly in the middle of the base. You should have 7.5" of base showing from underneath the playing surface.                Use two people with this step. One ... http://www.ezpokertables.com/attaching-the-playing-surface-oval-poker-table-plans/ Next, you will want to attach the racetrack to the padded foam. These pieces should fit together according to your marks that you made on them earlier. If necessary, use a long screwdriver as a lever to make the two pieces fit together snugly.   Use 3/4" screws around the entire edge ... http://www.ezpokertables.com/attaching-the-racetrack-and-padded-rail-oval-poker-table/ Place the racetrack over the playing surface. Make sure that you line the two pieces up as they were cut out of the sheet previously. I eyeballed the placement of the 10 cup holders but made sure that they were all 1 inch from the playing surface.                 Trace around the bottom ... http://www.ezpokertables.com/drilling-the-cupholders-oval-poker-table/ Before putting the table all together, you will want to attach the table legs. Lay the legs out on the bottom of the base so that there is about two inches between the bottoms of each leg.               Measure the width of the base and secure your legs to the middle of ... http://www.ezpokertables.com/attaching-the-table-legs-oval-poker-table/   The next process can be a messy one so I suggest doing it in the yard. Lay the playing surface on the ground. Make sure that you lie it down with the correct side up because this piece will have to fit back together with the racetrack. ... http://www.ezpokertables.com/covering-the-playing-surface-oval-poker-table/ If you are going to build the poker table as a weekend project I would definitely stain the racetrack on the first day/night. The Minwax stain suggests allowing at least 8 hours to dry.  First, you should sand down the birch racetrack until the surface is silky smooth. The sheets that ... http://www.ezpokertables.com/staining-the-racetrack-oval-poker-table/ This is arguably the toughest part of building the poker table. I would suggest using two people on this step. It will make it much easier and your rail will turn out much smoother.  The first step is to lay your foamed rail, upside-down, onto the back side of the ... http://www.ezpokertables.com/covering-the-rail-oval-poker-table/ Red Casino Poker Table Felt 55 x 108 inches Felt Layout For Poker Tables - Many different colors available Black Stretchable Poker Table Rail Vinyl 55 x 108 in Used For Rail Padding 1/4 Inch Poker Table Foam Padding 58 x 108 in Used For Table Surface Padding. This foam will allow for your ... http://www.ezpokertables.com/materials-list-oval-poker-table/