Attaching the Playing Surface – Oval Poker Table Plans

Posted on April 23, 2008 
Filed Under Poker Table Plans

First you will attach the playing surface to the base. Use a tape measurer to make sure that the surface is directly in the middle of the base. You should have 7.5″ of base showing from underneath the playing surface.














Use two people with this step. One person should make sure that the surface doesn’t move while the other person drills in 8-10 1 1/4″ screws in the base. Remember that the base is 3/4″ thick and the playing surface is ½” thick (not including the foam surface). You do not want the screws to come through the foam!! I’ve had it happen, so work slowly.


Next, you will want to use your excess foam to pad the base around the playing surface. This will allow for the racetrack to be flush with the playing surface. Some people like a raised playing surface, but I don’t. I think that table looks much more professional when the surfaces are flush. You could use extra 1/4” plywood, but this will add weight an already heavy table.


Drilling the Cupholders



Comments are closed.

Copyright © 2017 All Rights Reserved. Casino | Bodog Poker | Free Bets